View Product Brochure (PDF)
|
Step 1
Ready to splice - carrier rope ends, Kenbest® Fid, William Kenyon® safety knife, tape and marker.
|
Step 2
Mark both ends approximately 18" (46cm) and 40" (91cm) from end.
|
 |
 |
 |
|
|
Step 3
Push the basket back, insert one end of the rope, and release (to ensure a tight grip on the rope, compress the basket with your fingers). Insert the point of the fid at the 18" (46cm) mark on the opposite end.
|
Step 4
Push the fid through the rope and bring it out at the 40" (91cm) mark.
|
 |
 |
|
|
|
Step 5
To make a proper taper, pull the end through and mark at approximately 12" (38cm) and 7" (18cm). Insert your William Kenyon® "lock back" safety knife at the 12" (38cm) mark and lift slightly one set of ends. Cut and remove. Repeat at the 7" (18cm) mark.
|
Step 6
The tapered end. Work back into the center of the rope completely.
|
 |
 |
|
|
|
Step 7
Repeat steps 2-6 for opposite end.
The completed splice.
|
 |
|
|
